TOSHIBA TECRA A10-1KU Laptop Keyboard, TECRA A10-1KU keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1KU
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1KU
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1KU
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1KU keyboards tags: Satellite S205 , Satellite P20 laptop keyboard , Satellite A1135 , Qosmio G35. laptop keyboard , Satellite A35 , TOSHIBA Satellite A2 , TOSHIBA Satellite 1130 , Tecra M9-S551 laptop keyboard , TOSHIBA Tecra M9-S551 laptop keyboard , Satellite 1300 laptop keyboard , Satellite A6 laptop keyboard , Satellite S1 laptop keyboard , TOSHIBA Satellite A1130 laptop keyboard , Satellite A2 laptop keyboard , Satellite M2 , Satellite M40X laptop keyboard , Satellite A60 laptop keyboard , Satellite A4 , Satellite A3 laptop keyboard , Satellite 1130 , Satellite A45 , Satellite A120 , Satellite A45 laptop keyboard , Tecra M10-S34 laptop keyboard , Satellite S1130 , Satellite A1130 , Satellite M7 , Satellite A7
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1KU keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1KU keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1KU keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1KU laptop keyboard, please contact us.
TOSHIBA TECRA A10-1KU notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1KU keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1KU laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















